Skip to main content

Canada Goose Bot

Objectives​

Let's get familiar with how the GooseBot works!

Carobot Swiss Cheese

The primary objective of this project is to explore the use of magnetometers, a.k.a. "magnetic sensors," in robotics. By building a goose-inspired robot, we will learn how these sensors mimic the navigation technique of Canada Geese to help the robot navigate its environment.

Through this project, we will:

  • Understand the working principles of magnetometers.
  • Gain hands-on experience in assembling and programming a simple robot.
  • Learn about basic electronics and Arduino programming.
  • Explore how sensors can be used for navigation and orientation.

Requirements​

Hardware​

  • Simple Robot Chassis Kit: Includes 2 DC motors, 2 wheels, and a battery holder.
  • Magnetometer: Sensor that detects magnetic fields.
  • Arduino Uno + Cable: Microcontroller board for programming and controlling the robot.
  • CAROBOT Motor Shield v3: Extension board for driving the motors.
  • 0.1 microF Capacitors (x2): For filtering noise in the circuit.
  • Resistors:
    • 220 ohm resistors (x2) for current limiting.
    • 10k ohm resistor (x1) for the push button.
  • Push Button: For starting or resetting the robot.
  • Mini Breadboard: For creating the circuit connections.
  • Jumper Wires: For connecting components on the breadboard.
  • AA Batteries (x4): Power source for the robot.

Software​

  • Arduino IDE: Integrated Development Environment for writing and uploading code to the Arduino board.
  • Basic C/C++ Programming Knowledge: To understand and write the Arduino code.

Carobot Swiss Cheese

Bill of Material:​

  1. Simple Robot Chassis Kit (2 DC motors, 2 Wheels, battery holder)
  2. Magnetometer
  3. Arduino Uno + Cable
  4. CAROBOT motor shield v3
  5. 0.1 microF capacitor
  6. 220 Ohms resistor
  7. 10k Ohms resistor
  8. push button
  9. mini breadboard
  10. Jumper wires
  11. AA batteries

Carobot Swiss Cheese

Design​

The GooseBot is designed to mimic the behavior of a Canada Goose using its magnetic sense for navigation. The design includes:

  • Chassis and Motors: The base structure of the robot with wheels driven by DC motors.
  • Magnetometer: Attached to the front of the robot, acting as a nose to detect magnetic fields.
  • Arduino and Motor Shield: Central control system that processes sensor data and controls the motors.
  • Power Supply: Batteries to power the entire system.
  • Push Button: For user interaction to start or reset the robot.

When the magnetometer detects a magnetic field, it changes its readings. The Arduino reads this change and makes the robot turn towards the strongest magnetic pull, simulating the goose’s navigation behavior.

Implementation​

  1. Assemble the Chassis: Attach the DC motors and wheels to the chassis. Insert the batteries into the holder.
  2. Set Up the Magnetometer: Connect the magnetometer to the mini breadboard and wire it to the Arduino. Use the capacitors and resistors as needed.
  3. Install the Motor Shield: Attach the motor shield to the Arduino and connect the DC motors.
  4. Connect the Push Button: Wire the push button to the Arduino through the breadboard.
  5. Write the Code: Use the Arduino IDE to write a program that reads the magnetometer data and controls the motors based on the sensor input.
  6. Test and Debug: Upload the code to the Arduino, test the robot’s functionality, and make necessary adjustments.

Carobot Swiss Cheese

Conclusion​

Through this project, you will have gained practical experience in building and programming a robot, understanding the use of magnetometers for navigation, and learning basic principles of electronics and robotics. This hands-on project not only enhances your technical skills but also emphasizes the "hows" and "whys" by demonstrating real-world applications of sensors and robotics.